MHD simulation of high-current subsonic vacuum arc under different distributed axial magnetic fields

Based on two-temperature magnetic hydrodynamic (MHD) model, the influence of saddle-shaped distributed axial magnetic field (AMF, linearly increases along radial position) and bell-shaped distributed AMF (linearly decreases along radial position) on plasma loss and heat flux density to anode in subsonic high-current vacuum arc (HCVA) is simulated and analyzed. According to the simulation results, the saddle-shaped AMF can more effectively inhibit plasma loss from arc column than that of bell-shaped AMF. Comparisons between simulation results and experimental results further verify the correctness of model and simulation.     

光通信用垂直腔面发射激光器的进展

垂直腔面发射激光器(VCSEL)以其优异的性能有望成为信息时代的新光源.文章介绍了用于光通信的VCSEL的开发现状.     

碾压混凝土坝施工进度与质量控制的新措施

碾压混凝土重力坝和拱坝由于连续施工的坝体混凝土体积大，施工期间需要采取较为严格的温度控制措施，而所采取的温控措施是否有效，目前尚没有一个能够用于实际施工过程的快速有效的评估方法和方式，不能根据已施工坝体内的实际情况来控制施工进度和质量。利用分布式光纤温度测量系统来快速地获得坝体混凝土内部的大量温度信息，进而实际标定温度仿真程序并通过标定过程模拟拟施工的连续碾压层，以检验其温控措施的有效性。通过坝体内部的温度、温度变化速率和梯度来达到实时控制坝体碾压上升速度、坝面和仓面养护、以及冷缝灌浆处理等目的。     

Synthesizing Energy-Efficient Embedded Systems with LOPOCOS

In this paper, we introduce the LOPOCOS (Low Power Co-synthesis) system, a prototype CAD tool for system level co-design. LOPOCOS targets the design of energy-efficient embedded systems implemented as heterogeneous distributed architectures. In particular, it is designed to solve the specific problems involved in architectures that include dynamic voltage scalable (DVS) processors. The aim of this paper is to demonstrate how LOPOCOS can support the system designer in identifying energy-efficient hardware/software implementations for the desired embedded systems. Hence, highlighting the necessary optimization steps during design space exploration for DVS enable architectures. The optimization steps carried out in LOPOCOS involve component allocation and task/communication mapping as well as scheduling and dynamic voltage scaling. LOPOCOS has the following key features, which contribute to this energy efficiency. During the voltage scaling valuable power profile information of task execution is taken into account, hence, the accuracy of the energy estimation is improved. A combined optimization for scheduling and communication mapping based on genetic algorithm, optimizes simultaneously execution order and communication mapping towards the utilization of the DVS processors and timing behaviour. Furthermore, a separation of task and communication mapping allows a more effective implementation of both task and communication mapping optimizationsteps. Extensive experiments are conducted to demonstrate the efficiency of LOPOCOS. We report up to 38% higher energy reductions compared to previous co-synthesis techniques for DVS systems. The investigations include a real-life example of an optical flow detection algorithm.     

带有集中质量的分布质量弹性转动横振精确解

求得了带有集中质量的分布质量弹性转轴系统横向自由振动的频率方程和振型函数的精确解析表达式，及其与不转动轴系统自由振动的频率方程和振型函数及转动角速度之间的精确解析关系     

Ubiquitous Information Services with JAIN Platform

To provide responsive information services in a ubiquitous computing environment, service software and system development are indispensable. A component-based ubiquitous information system with a JAIN (Java APIs for Integrated Networks) platform to achieve seamless transmissions and reach-everywhere communications was designed in our research. In this development, numerous ubiquitous service modules were identified: location management, roaming, mobile IP and WAP networking. These component-based network modules were constructed using a component composition language with component specification and interface definition, running on top of a distributed service architecture using a JAIN platform to distribute the ubiquitous information services to mobile users. Two applications, Wireless-Application-Protocol (WAP) Mail and Video-on-Demand (VoD) services, show that the JAIN-like platform with the developed networking components effectively fills the gap for application developers between mobile appliances and various kinds of ubiquitous information services.     

Development of cable fault location method using fiber optic distributed temperature sensor

When ground-fault problems occur on a cable line, immediate fault location and restoration are required. Therefore, various new methods to locate the fault point instantaneously have been investigated to replace such conventional methods as the Murray loop method and the pulse radar method [1]. These methods require a long time to locate the fault point. One possible fault location method is to sense the temperature rise following a ground fault using a fiber optic distributed temperature sensor. Application of this method was found feasible through sensing the temperature rise at a ground-fault test using a thermocouple as a temperature sensor with test cables [4]. A power/optical composite cable was prepared experimentally and after verifying its thermal mechanical performance, the temperature rise at an incidence of a fault was determined and the anticipated performance was demonstrated in a ground-fault test. This article describes the outline of the test.     

Distributed Speech Recognition Systems and Some Key Factors Affecting It''''s Performance

1　IntroductionWiththerapiddevelopmentofInternetandmobilecommunications,theresearchonwirelessmobilenetworkshasbecomethenewhotspotinin formationtechnologyfield .Asweknow ,mobileterminals (mobilephone,forexample)arethetooltohelppeopletoaccessanyinformationtheyneedbyanymediaatanytimeandanywhere .However,itissometimesdifficultformobileterminalstoplaysucharolebecauseofthelimitationssuchaslimitedca pacity ,lowpower,andinconvenienceinoperating .So,peoplehopetofindanotherwaytoaccessnet workinformatio…     

Lifetime and ageing management of nuclear power plants: A brief overview of some light water reactor component ageing degradation problems and ways of mitigation

The susceptibility and tendency for nuclear power plant (NPP) components to undergo changes in their mechanical and physical properties in the course of the NPP lifetime is generally termed as “ageing”. The light water reactor (LWR) nuclear environment is not a begnign one; it is characterized not only by fast neutrons, which can degrade metallic structures, but also relatively high temperatures of coolant water (around 300°C) which may contain impurities (e.g. sulphate, chloride, peroxides) which can cause corrosion. The hydrodynamical conditions of the coolant in steam generators, for example, can cause thermal fatigue, erosion and corrosion; suspended particulate matter can accelerate erosion processes which can lead to wall thinning and lowering of safety margins. Ageing is, therefore, a very complex mixture of factors concerned with materials, temperatures, times of exposure to environments which vary with time and with respect to chemical composition and flow charactertistics.

The paper describes a few ageing phenomena which can be considered important due to their impact on nuclear safety issues; their influence on economic aspects (availability) of NPP is outlined. Mitigation measures for NPP component ageing problems are given together with recommendations for addressing such issues in NPP now and in the future.     

微型集散系统通用过程控制软件包

本文给出一种新的基于ＭＣＳ－５１单片机集散系统通用过程控制软件包的设计原理及其实施方法。文中重点地阐述了微型集散系统的构在民，通用过程控制软件的自动生成，主要数据结构与程序结构，实现方法及关键技术等。本软件包是采用ＴＵＲＢＯＣ２．０版本和ＭＣＳ－５１泄编语言编程的，并通过了ＭＣＳ－５１组合软件的编译，形成了可用的目标码程序系统。